STAIN-PROOF Original™ is an impregnating, invisible and breathable sealer that provides premium long term protection for natural stone, tiles, pavers, concrete, brick and grout from water and oil based stains and damage caused by water and dissolved salts. Treated indoor and outdoor surfaces become easier to clean and keep looking good for longer.
HOW TO USE
Regular Application
ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.
Ensure surfaces to be treated are dry, clean and free of residues.
Product is to be applied without thinning.
Generously saturate the surface with product using a low-pressure hand spray, a clean brush, or similar. Surface should have a mirror-like wet look for 3-5 seconds. Avoid contact with surrounding areas.
When the surface becomes touch dry, or after a minimum of 10 minutes, repeat Step 4. Total application rate is approximately one liter per two to 25 sq. meters (20 to 250 sq. feet per quart) depending on absorption.
After the final coat, wait approximately 10 minutes but before the surface dries, then polish the surface thoroughly with clean, dry, white cloths, towels or similar to remove excess product, moistening cloth STAIN-PROOF™ to ease polishing.
Use an organic solvent e.g. methylated spirits to clean equipment. Once cured, this product is food contact safe.
Sealer will not prevent surface etching, scuff marks or wear and may lighten or darken some surfaces. STAIN-PROOF Original™ will make the maintenance and cleaning of a treated surface much easier. Once cured, this product is food contact safe.
 
For Full Specifications Click here